Gigabyte is expanding its AORUS Elite series with two new 27-inch OLED gaming monitors: the FO27Q28G with a 280 Hz refresh rate and the FO27Q24G with a 240 Hz refresh rate. Both feature a WOLED panel from LG Display with QHD resolution (2,560 × 1,440), a response time of 0.03 ms, and a contrast ratio of 1,500,000:1. However, anyone comparing the two new Gigabyte OLED monitors should take a closer look: The much-cited “Tandem WOLED” design is only found in one of the two models.
This is precisely where the initial international coverage went wrong. Several sources claimed that both monitors would use LG’s Tandem-WOLED. That is not accurate. Only the FO27Q28G features the latest 4th-generation Tandem panel; the FO27Q24G sticks with a 3rd-generation WOLED panel with MLA+. We’ll explain this difference in detail below.
The most important points at a glance:
- Two new AORUS Elite models: FO27Q28G (280 Hz) and FO27Q24G (240 Hz), both 27 inches and QHD.
- The FO27Q28G features a 4th-generation Tandem WOLED panel with 1,500 nits and DisplayHDR True Black 500.
- The FO27Q24G uses a 3rd-generation WOLED panel with MLA+, 1,300 nits, and DisplayHDR True Black 400—so despite sharing the same chassis, it doesn’t use the same technology.
- Both models share a 0.03 ms response time, 1,500,000:1 contrast ratio, RealBlack glossy finish, AI OLED Care Pro, and a 4-year warranty that includes burn-in protection.
- Prices and a launch date for the DACH region have not yet been announced.
The OLED market is expanding rapidly this year. The figures on the OLED monitor boom—with a 92% increase in shipments—demonstrate just how strongly the segment is growing. Gigabyte is responding with its own premium line under the AORUS Elite label.
What’s behind the new AORUS Elite OLED monitors?
Both models are 27 inches in size, feature a resolution of 2,560 × 1,440 pixels (QHD), and feature Gigabyte’s “RealBlack Glossy” coating with a frameless design on all four sides. The glossy surface delivers vibrant colors and deep blacks, but can cause glare in bright rooms—a typical OLED trade-off.
For gaming, both offer the same core specs: a 0.03 ms response time (GtG), AMD FreeSync Premium Pro, and NVIDIA G-Sync Compatible for smooth, tear-free visuals. The contrast ratio is 1,500,000:1 for both, which—as is typical for OLED—delivers true black instead of dark gray areas. So far, so identical. The differences begin with the panel.
Tandem WOLED vs. MLA+: The Difference Between the FO27Q28G and FO27Q24G
The FO27Q28G is the real standout. Its panel is based on LG Display’s 4th-generation Tandem-WOLED—a multi-layered OLED structure designed to deliver higher brightness, better efficiency, and greater color volume than previous WOLED generations. Specifically, it achieves a peak brightness of up to 1,500 nits (at 1.5% APL, supported by HyperNits), covers 99.5% of the DCI-P3 color space, and is certified to VESA DisplayHDR True Black 500. Gigabyte specifies color accuracy as Delta E < 2, which also makes it suitable for color-critical work.
At first glance, the FO27Q24G looks the same, but technically it’s a step below. Instead of a tandem panel, it uses a 3rd-generation WOLED panel with MLA+—the same panel found in the recently introduced GO27Q24G. The result: “only” 240 Hz instead of 280 Hz, 1,300 nits instead of 1,500 nits, 98.5% DCI-P3 instead of 99.5%, and DisplayHDR True Black 400 instead of 500. It’s still a powerful monitor, but it doesn’t feature the tandem technology that was promised for both devices in some reports.
So if you specifically want the latest generation of panels, you’ll need to go with the FO27Q28G. The FO27Q24G is more of a slightly more affordable alternative for anyone who finds 240 Hz and 1,300 nits sufficient.
Technical Specifications Comparison
| Feature | AORUS Elite FO27Q28G | AORUS Elite FO27Q24G |
|---|---|---|
| Panel | Tandem WOLED (4th gen, LG Display) | WOLED + MLA+ (3rd gen, LG Display) |
| Size / Resolution | 27″ / 2,560 × 1,440 (QHD) | 27″ / 2,560 × 1,440 (QHD) |
| Refresh rate | 280 Hz | 240 Hz |
| Response time | 0.03 ms (GtG) | 0.03 ms (GtG) |
| Peak brightness | 1,500 nits (1.5% APL) | 1,300 nits (1.5% APL) |
| HDR certification | VESA DisplayHDR True Black 500 | VESA DisplayHDR True Black 400 |
| Color gamut | 99.5% DCI-P3 | 98.5% DCI-P3 |
| Contrast | 1,500,000:1 | 1,500,000:1 |
| Surface | RealBlack Glossy | RealBlack Glossy |
| DisplayPort | DisplayPort 2.1 | DisplayPort 1.4 |
| HDMI | 2× HDMI 2.1 (eARC) | 2× HDMI 2.1 (eARC) |
| USB-C | Yes (DP Alt Mode, 15 W PD) | Yes (DP Alt Mode, 15 W PD) |
| VRR | FreeSync Premium Pro, G-Sync Compatible | FreeSync Premium Pro, G-Sync Compatible |
| Warranty | 4 years, including burn-in | 4 years, including burn-in |
An often-overlooked detail: The FO27Q28G offers DisplayPort 2.1, while the FO27Q24G only offers DisplayPort 1.4. The faster interface is recommended for the full 280 Hz at QHD. Thanks to HDMI 2.1 with eARC, both monitors also support native 2K output from current-generation consoles.
OLED Protection, Features, and Connectivity
To address the perennial issue of burn-in, Gigabyte relies on “AI OLED Care Pro.” An AI-powered algorithm distributes the load across the panel, a sensor detects presence and turns off the screen when no one is present, and adaptive brightness control adjusts the output to ambient light. An improved thermal design with heat pipes is intended to reduce hotspots and maintain stable panel performance over time.
The warranty is reassuring: Both AORUS Elite models come with four years of coverage, including burn-in protection. That’s more than the usual three years Gigabyte offers on other OLED models, and it takes some of the wind out of the sails of one of the biggest concerns when buying an OLED. Our review of the ASUS ROG Strix OLED XG27AQDMG, a comparable 27-inch WOLED monitor, also demonstrates how far technology has come in preventing burn-in.
AORUS Elite FO27Q54G: 540-Hz Model in the Pipeline
In addition to the two QHD models, Gigabyte has announced a third AORUS Elite: the FO27Q54G. It is expected to feature a dual-mode configuration and, according to the manufacturer, reach up to 540 Hz, with an additional 720-Hz mode also under consideration. Specific specifications, a price, or a release date have not yet been announced. With this move, Gigabyte joins a race that other manufacturers have long been fueling—such as ASUS with the ROG Strix OLED XG259QWPG Ace, the first 540-Hz OLED monitor.
Context: Gigabyte in the OLED Race
The timing is no coincidence. Nearly every monitor manufacturer is currently filling its portfolio with OLED models, from MSI to ASUS and Acer to LG and Samsung. Just recently, MSI unveiled the MPG OLED 322URDX36, the first triple-mode OLED monitor, and LG is set to launch its 2026 UltraGear models with refresh rates of up to 720 Hz. Gigabyte is clearly positioning the AORUS Elite series in the premium segment and using LG’s latest panel technology as a selling point.
What’s still missing for these two new models are the hard facts buyers need: price and availability. Until those are finalized, it’s difficult to assess just how attractive the package will ultimately be. The technical foundation is solid, though, especially with the FO27Q28G.
FAQ on the Gigabyte AORUS Elite OLED Monitors
What is the difference between the FO27Q28G and the FO27Q24G?
The FO27Q28G uses a 4th-generation tandem WOLED panel with 280 Hz, 1,500 nits, and DisplayHDR True Black 500. The FO27Q24G features a 3rd-generation WOLED panel with MLA+, 240 Hz, 1,300 nits, and DisplayHDR True Black 400.
Do both monitors use Tandem WOLED?
No. Only the FO27Q28G uses LG’s Tandem WOLED. The FO27Q24G is based on an older WOLED panel with MLA+, even though some reports initially referred to both models as Tandem WOLED.
What is the response time?
Both models achieve 0.03 ms (GtG), making them suitable for competitive gaming.
How much do the AORUS Elite monitors cost in Germany?
Gigabyte has not yet announced a price or launch date for the DACH region. We’ll update this section as soon as official information becomes available.
Are the monitors protected against burn-in?
Yes. Both feature AI OLED Care Pro with an AI algorithm, a presence sensor, and adaptive brightness, and come with a four-year warranty that includes burn-in coverage.
Conclusion
With the FO27Q28G and the FO27Q24G, Gigabyte is introducing two solid OLED gaming monitors that look similar on the outside but are clearly different under the hood. The FO27Q28G, with Tandem WOLED, 280 Hz, and 1,500 nits, is the more exciting choice, while the FO27Q24G remains the slightly more understated alternative at 240 Hz. Above all, it’s important not to be misled by marketing: only the FO27Q28G features “Tandem-WOLED.” Price and availability are still unknown for a final verdict—but the technical foundation for this Gigabyte OLED monitor is already solid.
Sources: AORUS (FO27Q28G), AORUS (FO27Q24G),
