KIOXIA LD4: QLC SSD in E1.L form factor for 1U servers with up to 122.88 TB

Philipp Briel
Philipp Briel · 7 min. read

With the LD4 series, KIOXIA has introduced its first SSD in the E1.L form factor, which utilizes 8th-generation BiCS-FLASH QLC flash. The drives are designed for high-density 1U servers in hyperscale data centers and for read-intensive workloads. At launch, samples are available with capacities of 15.36 TB and 30.72 TB; according to KIOXIA, the architecture has already been validated for up to 122.88 TB. Important to note: Despite the “PCIe 5.0” label, the LD4 operates at 16 GT/s, which is on par with PCIe 4.0 speeds.

Key Points at a Glance

  • KIOXIA’s First E1.L SSD Featuring 8th-Generation BiCS FLASH QLC
  • Initial capacities: 15.36 TB and 30.72 TB; validated architecture up to 122.88 TB
  • Interface: Compliant with the PCIe 5.0 specification, but at 16 GT/s x4, which effectively means Gen 4 speed
  • NVMe 2.0e, OCP Datacenter NVMe SSD Specification v2.6 (reportedly not all requirements), single-port
  • Status: Sample for select customers; presentation at the OCP Global Summit 2026 (October 12–15, San Jose)
  • No information on price, performance specifications, or production start date

KIOXIA LD4: What Sets the New E1.L SSD Apart

The LD4 is not a drive for desktop PCs, but rather a classic data center product. KIOXIA is targeting operators who need to fit as many terabytes as possible into a rack without consuming more power, cooling, or rack units. That’s exactly what the E1.L form factor is built for: The “Ruler” SSD is 9.5 mm thick and 318.75 mm long. The large circuit board area offers plenty of space for NAND packages, and depending on the server design, dozens of these drives can be installed side by side in a 1U chassis.

The storage solution uses 8th-generation BiCS FLASH in a QLC configuration, combined with KIOXIA’s proprietary controller and firmware. According to StorageReview, the manufacturer cites object storage and data sets for AI and machine learning as typical use cases. In addition, the drive offers power loss protection (PLP) and end-to-end data protection, as expected from a data center SSD.

PCIe 5.0 or PCIe 4.0? A Closer Look at the Interface

The press release lists “PCIe 5.0 (Gen 4 x4)” as the first feature. This sounds contradictory, and only the footnote clarifies: The LD4 complies with the PCIe 5.0 specification but transmits data at up to 16 gigatransfers per second over four lanes. 16 GT/s is the signal rate of PCIe 4.0. PCIe 5.0 operates at 32 GT/s.

In practice, this means the interface’s bandwidth is around 7.9 GB/s in each direction—roughly half of what a true Gen5 x4 SSD can theoretically achieve. So anyone who sees “PCIe 5.0 SSD” and expects Gen5 speeds will be disappointed. For its intended use, however, this isn’t a major drawback—more on that below. KIOXIA has not yet published specific read and write speeds or IOPS figures.

KIOXIA LD4 Technical Specifications at a Glance

Characteristic KIOXIA LD4
Form factor EDSFF E1.L (9.5 mm thick, 318.75 mm long)
Storage BiCS FLASH QLC, 8th Generation
Controller / Firmware Developed in-house by KIOXIA
Capacities (Sample) 15.36 TB, 30.72 TB
Validated Maximum Capacity up to 122.88 TB
Interface PCIe 5.0-compliant, up to 16 GT/s x4 (Gen 4 speed)
Minutes NVMe 2.0e
OCP Datacenter NVMe SSD Specification v2.6 (not all requirements)
Port Design Single-Port
Privacy Policy Power Loss Protection, End-to-End Data Protection
Performance, Endurance, Price not yet known
Status Samples for Selected Customers

Why QLC in the E1.L format makes sense for hyperscalers

QLC flash stores four bits per cell. This means that, for a given capacity, fewer NAND packages are needed than with TLC, which reduces the area and cost per terabyte. The trade-off is lower write endurance and weaker sustained write performance. For read-intensive applications such as object storage or training data repositories—which are written once and then read frequently—this is hardly a factor.

The situation is similar with the Gen4 connection. If a 1U server is fully equipped with E1.L drives, the CPU’s PCIe lanes and the server’s network connection are more likely to be the limiting factors than the speed of a single drive. The key factor here is how many terabytes are contained in each drive bay. Here’s a sample calculation: With 32 drive bays, as found in early E1.L server designs, even today’s 30.72-TB models would total just under 1 PB per rack unit. With 122.88-TB drives, that figure would be around 3.9 PB. However, the number of slots a specific server offers depends on its design.

Integration into the KIOXIA Portfolio

The LD4 occupies its own niche. The LC9 QLC series features dual ports, uses true PCIe 5.0, and offers capacities up to 245 TB, making it suitable for other server and storage systems. The NX1 series with Direct Liquid Cooling, introduced in July, comes in the more compact E1.S form factor and is designed for GPU servers. For maximum performance, KIOXIA recently announced the CM10 series with PCIe 6.0 and the GP1 series, which is optimized for extremely high IOPS. The LD4, on the other hand, is the drive designed purely for capacity in slim 1U servers.

Competitors are also increasingly turning to QLC in data centers. Samsung, for example, has announced the BM9K1, a QLC SSD with a RISC-V controller.

Availability

The LD4 series is currently being sent as samples to select customers. KIOXIA notes that these samples are intended solely for functional testing and that specifications are subject to change prior to mass production. The SSD will be on public display at the OCP Global Summit 2026, which takes place October 12–15 in San Jose, California. KIOXIA has not specified when samples with higher capacities up to 122.88 TB will be available. No prices have been announced, and the LD4 will not be available to end consumers anyway.

FAQs About the KIOXIA LD4

What is the KIOXIA LD4?

The LD4 is a data center SSD in the EDSFF-E1.L form factor featuring QLC flash (BiCS FLASH, 8th generation). It is designed for high-density 1U servers and read-intensive workloads in hyperscale environments.

Is the KIOXIA LD4 a PCIe 5.0 SSD?

Only on paper. It complies with the PCIe 5.0 specification but operates at 16 GT/s x4. This corresponds to the speed of PCIe 4.0 and approximately 7.9 GB/s in each direction.

What capacities does the LD4 offer?

Initial capacities of 15.36 TB and 30.72 TB. According to KIOXIA, the architecture has been validated for up to 122.88 TB, but a release date for these models has not yet been announced.

What is E1.L?

E1.L belongs to the EDSFF (Enterprise and Datacenter Standard Form Factor) family. The long, flat “ruler” SSDs fit vertically in 1U servers and offer ample board space for flash memory, enabling high capacities per slot.

Can I buy the KIOXIA LD4?

No. The LD4 is currently only being distributed as a sample to select data center customers and is not intended for retail sale.

Classification

The LD4 is an unspectacular but well-executed product. KIOXIA has deliberately opted not to include Gen5 bandwidth or dual ports, instead optimizing for terabytes per height unit. For hyperscalers with read-heavy data sets, this is exactly the right balance. I find the marketing messaging a bit unfortunate: placing “PCIe 5.0” at the very top of the feature list, even though the drives operate at Gen4 speeds, creates confusion rather than clarity. The series will only really become exciting once the announced capacities exceeding 30 TB become available. As long as KIOXIA doesn’t provide performance data, endurance ratings, or a timeline, the LD4 remains primarily a glimpse into what’s possible in the 1U form factor.

Sources