QIDI X-SMART 3 and X-PLUS3: Two extra-fast 3D printers launch
Manufacturer QIDI-Tech is launching two new 3D printers that feature particularly high printing speeds, smart functions and an especially large printing surface. We have all the info on the QIDI X-SMART 3 and X-PLUS3.
Inhaltsverzeichnis / Table of contents
QIDI X-SMART 3 and X-PLUS3: Fast and large 3D printers
With print speeds of 600 mm/s in the case of the X-PLUS3 and 500 mm/s for the X-SMART3, QIDI-Tech’s two new 3D printers go full throttle. Both models accelerate to 20,000 mm/s² and thus create even complex prints from PLA, ABS and PETG materials in an astonishingly short time.
Leveling is fully automatic for both models. The X-PLUS3 scores with a comparatively large print area of 280 mm x 280 mm x 270 mm, while the X-SMART3, the price-performance hit, has a size of 180 mm x 180 mm x 170 mm.
The printing accuracy of QIDI X-SMART 3 and X-PLUS3 has also been increased by 20 percent compared to the previous generation, which therefore promises even more precise and detailed prints.
Interestingly for newcomers to 3D printers, the X-PLUS3 comes fully assembled to your home, so you can get started right away after the initial setup. At the same time, the companion software has been made more user-friendly, making setup and use quicker and easier.
Up to 600 mm/s print speed
Under the hood of both the QIDI X-SMART 3 and X-PLUS3 models is a new version of KLIPPER, a 64-bit processor that clocks at 1.5 GHz and comes with 8 GB of eMMC and 1 GB of DDR-3 RAM.
The 3D printer’s Core XY structure also reduces motion inertia, improving speed. At the same time, the ultra-quiet TMC2209 drive ensures less noise during printing. The transmission ratio of 9.5:1 also enables more stable, faster and stronger prints.
At the same time, the weight of the components has been greatly reduced: The carbon fibers now weigh only 600 grams instead of the previous 1,600 grams, while the strength has also been improved.
Controlled temperature chamber + drying box
QIDI X-SMART 3 and X-PLUS3 feature two hot-end sets that offer better thermal conductivity and turn out more durable, while the hardened steel nozzle can handle demanding materials.
A maximum temperature of 350 degrees Celsius is achieved, while the chambers are heated independently of each other to 65 degrees Celsius. This is said to offer advantages, particularly when printing complex ABS structures.
This heated chamber ensures that the pressure is built up evenly without creating tension inside. This then ultimately leads to more precise and even more detailed prints on the QIDI X-SMART 3 and X-PLUS3.
QIDI X-SMART 3 and X-PLUS3 price: 3D printer with attractive price advantage
In addition to the strong feature set of the two 3D printers QIDI X-SMART 3 and X-PLUS3, both models also score with an attractive price. As part of the product launch, you can also save big again until May 30, 2023.
So the QIDI X-PLUS3 is priced at 849.00 euros compared to the recommended retail price of 1,099.00 euros. The QIDI X-SMART3 provides a particularly affordable entry into the world of 3D printers and costs only 499.00 euros in the introductory offer. Both models are currently available for pre-order and will be shipped directly from the manufacturer’s EU warehouse at the end of April 2023 and the beginning of May, respectively.
Gehört zum Inventar