Cooler Master has enclosures in every range, from low budget to high-end, every potential buyer can be served. The MasterBox MB500 is in the midfield. We’ll take a look at what the case has on it for you.
The MB500 has a nice aggressive front with an otherwise simple construction. The rounded front with the recessed mesh grid makes a good first impression. This one continues like this. The front is made of plastic, but feels high quality. The rest stands on a solid steel scaffold. The weight of the housing is also striking. Despite the steel and glass pane, the case weighs only 6 kilograms. Apropos glass pane, we like the fact that it is only mounted with two screws and is only hooked into the lower area. This is not only good for the appearance, but also facilitates assembly.
The front of the housing can be removed just as easily as the glass pane on the side. It can be removed without much effort and just as easily reattached. The mesh grid has large holes and allows a view of the RGB LED fans. But a dust filter was omitted, unfortunately. Two of the three pre-installed fans are installed behind the front. Cooler Master installs the in-house MasterFan Pro 120 with RGB LEDs. On the back side we find the third fan.
The housing itself offers plenty of room for additional fans or radiators. A total of three 120 mm or two 140 mm fans are possible in the front. In addition, radiators up to 360 millimeters in size can be installed there. The lid can accommodate two 120 mm fans and the rear area has a third fan, which can also be replaced by a radiator. The currently trendy magnetic dust filter is located on the lid. It’s a bit finer than the one in the front, but it won’t be able to stop too much dust.
The I/O panel doesn’t offer much, but is well adapted to the design. The power button has the shape of the Cooler Master logo and is equipped with a white LED. Furthermore, there are two audio connections for headphones and microphone, as well as two USB 3.0 slots. At this price, a Type C connector would be an extra that doesn’t have to be. Moreover, the standard has not yet really established itself.
A total of seven expansion slots can be found on the back. In addition, one of the three MasterFan Pro 120 fans is also mounted there. The power supply unit is attached with an extra holder, so the power supply unit can be simply pulled out at the back at any time. A whole 180 millimetres can also accommodate extra long power supplies.
We don’t find that much on the underside. There are four feet with extra rubber to protect the floor and dampen vibrations. A dust filter is fitted under the power supply unit. Unfortunately, the filter can only be removed if the housing is placed on its side.
Cooler Master MasterBox MB500 RGB - ATX-PC-Gehäuse mit Mesh Platte, 3 vorinstallierten Lüftern (120 mm), Glasseitenwand, flexiblen Luftstromkonfigurationen price comparison
By purchasing via the links from our price comparison, you support our editorial work without incurring additional costs. We thank you for your support.