The market for robot vacuum cleaners and mops is pretty confusing at the moment. Almost every new model promises more suction power, better edge cleaning, hotter mop washing and even more automation in the station. On the data sheet, the MOVA P70 Pro Ultra looks like an upper-class appliance: 30,000 Pa suction power, rotating mops, 100 °C mop wash, mop tray for carpets, AI obstacle detection and a comprehensive station. At the same time, the RRP is 699 euros. This is remarkably low for this level of equipment. The test was therefore not only about what the P70 Pro Ultra can do, but also about where MOVA has saved money for this price.
Technical data of the MOVA P70 Pro Ultra
| Model | MOVA P70 Pro Ultra |
|---|---|
| System type | Vacuum and mopping robot with cleaning station |
| Suction power | 30,000 Pa |
| Mopping system | Dual rotating mops (260 rpm, 12 N pressure) |
| Edge cleaning | MaxiReach with extendable mop arm and side brush |
| Navigation system | LiDAR + AI camera |
| Object recognition | Over 280 object types |
| Mop washing | 100 °C hot water with PTC system |
| Mop drying | 70 °C hot air, approx. 1 hour |
| Carpet features | Ultrasonic detection, 10.5 mm mop lift, mop storage in the station |
| Obstacle clearance | 22 mm |
| Tanks | 4.0 liters fresh water / 3.5 liters waste water |
| Price (RRP) | 699 Euro |
Unboxing and a look at the scope of delivery
As soon as we opened the surprisingly heavy box, it became clear that MOVA was not sending the P70 Pro Ultra as a basic package. In addition to the robot and station, the most important accessories are also included. The scope of delivery of the MOVA P70 Pro Ultra at a glance:
- MOVA P70 Pro Ultra
- Cleaning station
- Two mop pads
- Side brush
- Main brush
- Ramp extension
- Dosing module for cleaning agent
- Washboard filter insert
- Dust bag
- Cleaning concentrate
- Operating instructions
Design and workmanship: station and robot in detail
The station of the MOVA P70 Pro Ultra is large, but not bulky. For an appliance that has to accommodate fresh water, waste water, dust extraction, mop washing, drying and cleaning agents, it even looks really smart. The brushed front panel in particular is visually appealing and makes the station look less like a classic household appliance.
The robot itself has a much more restrained design. The LiDAR tower sits at the top, the camera and sensors are located at the front, while the housing remains largely plain on the sides.
In terms of height, the P70 Pro Ultra remains more inconspicuous than the fixed LiDAR tower might suggest. Although the superstructure is visible on the top, it does not turn the robot into a small tower on wheels. With very low furniture, it is still worth taking a quick look at the measuring tape, as the edge at the front of the furniture is often the deciding factor, especially under beds or sideboards.
The top cover is firmly attached and can be opened. On some more expensive models, however, a magnetic lid looks a little more premium because it can be easily removed and replaced. This is not a real disadvantage, but rather one of those points where you can see why the P70 Pro Ultra is priced below some flagships.
View of the underside: brushes, mops and sensors
30,000 Pa suction power sounds impressive, but on its own it doesn’t say much about how well a robot cleans. More important is the interaction between the motor, airflow, main brush, side brush, wheels and carpet detection. This is precisely why it is worth taking a look at the underside of the P70 Pro Ultra.
The main brush does not rely on classic bristles, but on a structured rubber roller with fins. This is particularly practical for hair and fine dust, as less gets caught directly in the brush than with simple bristle rollers. It is not completely maintenance-free, but the design makes sense for households with carpets, pet hair and normal everyday dust.
The two large drive wheels are also striking. They are important because a robot with so much station technology doesn’t just have to roll over smooth surfaces. Door thresholds, carpet edges and small transitions are simply part and parcel of many homes. According to the manufacturer, the P70 Pro Ultra is designed for obstacles up to 22 mm. In normal old buildings and mixed-floor apartments, this is a value that is definitely relevant.
Station in detail: Tanks, dust bag and cleaning agent
The station on the MOVA P70 Pro Ultra is much more than just a charging station. It vacuums the robot’s dust container, washes and dries the mops and dispenses the cleaning solution as required. A large part of the maintenance is therefore transferred from the robot to the station. The two water tanks are located at the top: the light-colored tank for fresh water and the darker tank for dirty water after washing the mops. Both can be removed and replaced without much fiddling.
The dust bag is located behind the brushed front panel and is easy to reach. After cleaning, the station empties the robot’s dust container automatically. This is audible for a few seconds, but is normal for suction stations. On the other hand, you don’t have to touch the small container in the robot as often.
The washing area for the mops is located at the bottom of the station. The pads are rinsed out here after cleaning and then dried. This solution is not completely maintenance-free. The washing area should be checked and wiped out occasionally because residue can collect there over time. The difference, however, is that this work is bundled together and not after each individual ride.
The cleaning solution is now also based on a familiar principle. Many manufacturers use their own cartridges or dosing modules for their stations so that the cleaner does not have to be added to the fresh water tank by hand each time. MOVA solves this problem with a refillable module that is inserted into the side of the station. This is practical because the dosing happens automatically. At the same time, you have a little more flexibility than with closed cartridges: You can also fall back on suitable alternatives if necessary. Ultimately, this is also a question of budget, as original cleaners are rarely the cheapest option in the long term.
App, setup and mapping
Setting up the MOVA P70 Pro Ultra is quick and easy. Install the app, scan the QR code, connect to Wi-Fi and wait for the firmware update. The first mapping run then starts. The robot mapped our 50 m² test apartment in less than four minutes. Rooms, doorways and larger pieces of furniture were recognized immediately.
The map was also easy to use after the first round. Rooms can be named, exclusion zones marked and carpets marked. We didn’t need to do much rework. After a quick check, we were able to start the first cleanings.
Cleaning plans, suction levels, water quantities and room sequences can be defined in the app. It’s good that you don’t have to set everything across the board. The kitchen can be mopped more damply, the bedroom more cautiously and sensitive areas can be excluded using the exclusion zone.
There is a separate area for pets, with detection, stay zones and a monitoring function. The app can also create images and small GIFs. This is a bit playful, but quite charming for households with a dog or cat.
Overall, the app is not overloaded. The most important functions can be accessed quickly, but there is still enough depth for more precise adjustments.
How powerful is the MOVA P70 Pro Ultra when vacuuming in the test?
In suction mode, the P70 Pro Ultra quickly shows that 30,000 Pa is not just a figure for the data sheet. At a low level, it remains pleasantly restrained. In Max+ mode, however, you can hear it clearly. If you leave it running next to the sofa in the evening, you’ll soon realize that it’s no longer something to do on the side.
For the suction test, we divided our black test carpet into five areas. Animal hair from undercoat, finely crumbled dried basil, coarser rice wafer crumbs, crumbled toast and salt landed on it. We vacuumed in Max+ mode, i.e. with the highest available power. On the dark carpet, this looked pretty merciless, but was just right for the test. Fine particles, light crumbs, hair and salt behave very differently when vacuuming.

After the first run, a lot had already disappeared. The MOVA reliably removed toast and rice cakes. The fine residues were more difficult. Some salt, basil and undercoat remained visible in the carpet at first.
The second run then made all the difference. Shortly before the end, there was only a single rice wafer crumb on the carpet, which the robot then also picked up. After that, the area was almost completely free. This exactly matches the impression from the test: The P70 Pro Ultra has a lot of power, but sometimes needs a second round for fine litter and hair in the carpet.
The P70 Pro Ultra has strong reserves for homes with carpets, pets and regular dirt ingress. Nevertheless, you should not expect miracles. A single pass is not always enough for fine particles and undercoat. However, if you give it a second round, the result is much more convincing.
How does the MOVA P70 Pro Ultra perform when mopping?
When mopping, the MOVA P70 Pro Ultra works with two rotating mops. According to the manufacturer, they rotate at 260 revolutions per minute and exert 12 Newtons of pressure on the floor, i.e. around 1.2 kg. So the robot is not just dragging a damp cloth behind it. The pads work visibly on the floor and mechanically loosen dirt.
For our mopping test, we put cola, mustard and liquid vegetable cream on the floor to fry. Quite a thankless mixture. Cola sticks. Mustard stains. Plant cream brings grease into play. Stains like these quickly show whether a mopping system really takes something away or just runs over it with a damp cloth.
Overall, the P70 Pro Ultra coped well with the test. Cola and mustard were visibly picked up after the passes. Even the vegetable cream did not just stay put. The surface looked much tidier afterwards. At the same time, this test showed very well how rotating mops deal with greasy dirt.
The pads loosened the stains and visibly absorbed something. With the plant cream, however, you could also see quite clearly where rotating mops have their limits. The grease didn’t just disappear, but first formed a thin film over the surface. Although the robot worked its way through the stain bit by bit, the film of grease was still clearly visible after the first few passes.
This is exactly why we included the plant cream in the test in the first place. With cola and mustard, you can see relatively quickly whether a robot picks up stains. Grease, on the other hand, shows better how the mopping system really works. Although the rotating mops loosen the dirt, they do not pick it up as directly as a mop roller. First of all, a thin film is created, which the P70 Pro Ultra has to work its way through step by step.
The test was deliberately tough. Cola, mustard and greasy vegetable cream are not a normal everyday mixture, but rather the case where a wiping system quickly reaches its limits. In the end, the MOVA got the surface visibly under control, but with grease it needed several passes. This is completely sufficient for light stains, shoe marks, dust film and minor kitchen spills. For older, sticky or very greasy areas, however, it does not always replace a quick swipe with a cloth.
MaxiReach helps with edge cleaning. The mop extends sideways and the side brush can also reach edge areas better. This is not just an app function, but is clearly visible when driving. Initially, the P70 Pro Ultra was still a little cautious when approaching edges. After several trips, this became more precise, the mop arm extended more precisely and came visibly closer to skirting boards, kitchen fronts and table edges. Narrow furniture legs and angled corners remain difficult, but MaxiReach clearly makes a difference on straight edges.
Carpets and mop tray: damp pads don’t stay on the robot
The MOVA P70 Pro Ultra has several options when dealing with carpets. It can lift the mops by up to 10.5 mm, avoid carpet areas when mopping or place the mops in the station and then continue as a pure vacuum cleaner.
The mop lift is usually sufficient for flat carpets. For higher pile or more sensitive carpets, however, the mop lift is the more convenient solution. The P70 Pro Ultra then returns to the station, places the mop pads down and then vacuums carpets without damp mops. This takes a little longer, but removes that uncomfortable feeling that damp pads could be brushing against sensitive surfaces.
This function is probably not crucial for purely hard-floored homes. However, anyone who combines hard floors with rugs, carpets or more sensitive areas will quickly appreciate the mop tray.
Navigation and obstacle detection: big things yes, small things difficult
For navigation, the MOVA P70 Pro Ultra combines LiDAR with camera and sensor technology. The LiDAR tower takes care of orientation in the room, while the front sensors detect obstacles and react accordingly.
We set up a small course for the test. On the floor were a slipper, a shoelace, a bunch of keys, a hair tie, earplugs and a dog toy. In other words, just the right mix of larger objects and annoying small items that are easily found lying around.
The P70 Pro Ultra coped well with the larger items. A slipper, bunch of keys and dog toy were at most lightly tapped, but not displaced significantly. Our dog also remained relaxed during the test. The robot didn’t follow closely, kept a sufficient distance and appeared rather cautious. This is exactly what you want to see when a robot hoover is not only cleaning furniture legs, but also a real household.
The MOVA was much less confident with small, light and stringy items. It dragged the shoelace along with it and even dropped a mop when it got tangled. It initially ran over the earplug, but later dropped it again. The hair tie was also no longer in place after being run over.
The short version: The P70 Pro Ultra recognizes large objects properly, but small items remain a risk. Shoelaces, hair ties, earplugs, small cables or very flat objects should be removed from the floor before starting. Otherwise, the robot may drag them along or be disturbed by them.
On the other hand, the robot proved to be solid on door thresholds and transitions. The specified 22 mm is sufficient for normal thresholds and carpet transitions, but is not a free pass for every high old building edge. If you have higher transitions in your home, you should measure beforehand. Within the MOVA family, models with the StepMaster system remain the more specialized choice for such floor plans.
Model hierarchy: Where does the MOVA P70 Pro Ultra stand?
At MOVA, the classification is no longer quite as simple as small model, medium model, top model. The devices differ not only in terms of price, but also in terms of the problem they are intended to solve. Sometimes it’s about getting as much power as possible for the money, sometimes it’s about edge cleaning, carpet protection, thresholds or particularly hard-to-reach areas. This is precisely why it is worth taking a look at the neighbors in the range.
| Model | Price level | Suction power | Technical focus | Classification |
|---|---|---|---|---|
| MOVA E30 Ultra | 349 € RRP | 7,000 Pa | Automatic station, solid basic equipment | affordable entry-level model for hard floors and normal soiling |
| MOVA E40 Ultra | 449 € RRP | 19,000 Pa | MaxiReach mop, all-in-one station, warm air drying | Exciting price-performance point with more convenience |
| MOVA P50 Pro Ultra | 649 € RRP | 19,000 Pa | 75 °C mop wash, carpet strategy with mop handling | Balanced intermediate step for comfort seekers |
| MOVA P70 Pro Ultra | 699 € RRP | 30,000 Pa | 100 °C mop wash, 12 N pressure, mop tray, MaxiReach | Strong price-performance model for vacuuming, mopping and carpets |
| MOVA V50 Ultra Complete | 999 € RRP | 24,000 Pa | StepMaster system, FlexScope navigation | Alternative for high thresholds and very low furniture |
| MOVA V70 Ultra Complete | 1,399 € RRP | 40,000 Pa | MaxiReachX, bagless EcoCyclone station, up to 9 cm obstacles | New premium model for maximum reach around edges and difficult floor plans |
The P70 Pro Ultra is in an interesting position. It is not the most expensive model in the MOVA range, but offers a lot of technology for its RRP: 30,000 Pa suction power, 100 °C mop wash, mop tray and MaxiReach are available for significantly less money than the new premium models.
The V50 Ultra Complete is not simply the better P70. It is tuned differently. Its suction power is lower, but it comes with the StepMaster system for higher thresholds and the retractable FlexScope navigation. If you have a lot of transitions or very low furniture, you should still consider it.
The V70 Ultra Complete goes one step further. It offers 40,000 Pa, a bagless station and MaxiReachX with a much wider extending mop and side brush. This sounds like a technically more exciting solution for homes with lots of edges, chair legs, narrow gaps and higher thresholds. In terms of price, however, it’s in a different league.
So if you’re looking for as much equipment as possible for 699 euros, you’ll end up with the P70 Pro Ultra. If you have a lot of thresholds or very low furniture, you should consider the V50 Ultra Complete. And if you want the technically new top model with maximum edge reach, bagless station and even higher suction power, look towards the V70 Ultra Complete. This does not make the P70 Pro Ultra any less exciting – it clearly takes its place as the price-performance winner within the MOVA family.
Conclusion of the MOVA P70 Pro Ultra test: Range of functions in a price war
The MOVA P70 Pro Ultra is not a perfect vacuum and mopping robot, but it is a really strong package. It vacuums powerfully, mops actively, gets closer to edges with MaxiReach, can put down the mops for carpets and comes with a station that does quite a lot of the work. For 699 euros RRP, that’s quite something.
You notice that savings have been made somewhere in the little things. The hinged hood doesn’t look quite as high-quality as a magnetic lid, the Max+ mode is clearly audible and you still have to keep an eye on the brush if you have very long hair. None of this ruins the impression. It just shows that the P70 Pro Ultra is not an uncompromising luxury model, but a device that quite cleverly trims its technology for price.
The P70 Pro Ultra makes the most sense in households with hard floors, carpets, pets and regular dirt ingress. For a small apartment with almost exclusively hard floors, it would probably be too much of a good thing. However, if you are looking for a robot that largely takes care of vacuuming, mopping, mop care and carpet handling itself, you get a lot of features for your money.
PROS
- 30,000 Pa suction power for just $699
- 212°F hot water mop washing with PTC system
- Complete package includes cleaning solution and accessories
- Extendable mop arm for improved edge cleaning
- Large water tanks: 4.0L clean, 3.5L waste water
- Premium brushed metal front panel on base station
CONS
- Hinged lid instead of magnetic cover
- Large base station requires significant floor space
- LiDAR turret limits clearance under low furniture
Conclusion
The MOVA P70 Pro Ultra delivers genuine flagship-level technology at a fair price, impressing with powerful suction, intelligent navigation, and well-thought-out features. For those seeking autonomy and thoroughness, this offers exceptional value for money.



