As Full HD monitors are almost a thing of the past these days, WQHD monitors are the next largest class. With the P27GR, TITAN ARMY has a 27-inch flat screen in this class in its portfolio, which is primarily aimed at price-conscious gamers. In addition to a refresh rate of 180 Hz including FreeSync support, HDR10 is also used. A number of gaming features are also integrated, ranging from Game Dark Enhancement and an ultra-fast mode with 1 ms latency to a dynamically sharpened resolution.
This test will clarify whether the TITAN ARMY P27GR is convincing and ultimately receives a purchase recommendation.
Technical data
| Model | P27GR |
| Display size | 27 inch (68.58 cm) |
| Display resolution | WQHD (2,560 x 1,440 pixels) |
| Screen refresh rate | 180 Hz |
| Panel type | Fast IPS |
| Curvature | Flat |
| Backlighttype | ELED |
| Picture format | 16:9 |
| Brightness | 300 cd/m² (type) |
| Contrast ratio | 1.000:1 |
| Screen colors | 16.7 million |
| Color space | 99 % sRGB, 90 % DCI-P3 |
| Viewing angle | H: 178° / V: 178° |
| Response time | 1 ms (GtG) |
| Adaptive synchronization | AMD FreeSync |
| Connections | 2 x HDMI 2.0 2 x DP 1.4 1 x audio output |
| Integrated speakers | Available |
| color | Black color |
| VESA mount | 100 x 100 mm |
| weight | 3.65 kg |
| Energy consumption | ≤ 35 W (type), ≤ 54 W (max) |
| Standby consumption | ≤ 0,5 W |
| Price | € 169.99 * |
Scope of delivery
- Gaming monitor and two-piece stand included
- Pre-assembled connection loop with red accent
- Displayport cable, power supply unit, operating instructions
In addition to the gaming monitor itself, the scope of delivery also includes the corresponding stand, which consists of two parts. The connection loop is already pre-attached to the stand and is highlighted with a red accent. A Displayport cable, the power supply unit and the user manual, which is also available in digital format, round off the package.
Assembly
- Stand is simply clipped onto the back
- Base plate is hooked into the stand
- VESA mount (100×100) for wall mounting
Mounting the TITAN ARMY P27GR is done in no time at all, as only a few steps are required. First, the stand is clipped onto the back of the monitor. The base plate can then be hooked into the stand. From this point on, the TITAN ARMY P27GR is ready for use, except for the cabling.
If you don’t want to mount the gaming monitor and want to hang it on the wall instead, you can do this too. VESA mounts with dimensions of 100×100 are supported.
Optics & processing
- Color combination of black and strong green tone
- Base is large and takes up a lot of space on the table
- Sturdy workmanship, but spongy controls
Visually, the TITAN ARMY P27GR makes a good impression and fits in with the usual mid-range monitors for gaming. In terms of color, however, it is a little out of the ordinary, as the manufacturer has opted for a combination of black and a strong shade of green. The green adorns the TITAN ARMY lettering on the front apron and the on-screen display. The connections on the back are also highlighted in color, which should make cabling easier. The base, on the other hand, is comparatively large and takes up quite a bit of space on the desk. The gaming monitor can be tilted between -5° and up to 20 ± 2°.
In terms of workmanship, the TITAN ARMY P27GR doesn’t make any major blunders. However, if you are looking for a monitor without an overly thick bezel, you may reach your limits here. While the edge on the inside is around 6 mm, it is around 9 mm from the display to the outer edge. Otherwise, the gaming monitor shows its positive side. The stand and base are very stable and ensure a secure stand on the table. The ventilation slots on the back run all around and ensure effective cooling. Only the controls are slightly spongy, although these are generally only used when setting up a monitor for the first time.
Operation and the OSD
- Control via 5 buttons on the bottom edge of the monitor
- OSD offers 10 customizable picture modes and various picture enhancements
- Gaming functions with HDR and Adaptive Sync can be activated
Operation is via five buttons on the bottom right edge of the monitor. The on/off button is on the far right and is equipped with an LED. To start the OSD, click on the circle symbol, i.e. the left button. Apart from this, as usual, there is a forward and backward button and a back button.
Ten predefined presets can be selected in picture mode via the OSD. These differ in brightness, contrast, saturation, hue and temperature as well as the gamma value. Of course, these presets are not set in stone and can be overwritten as required. It is also possible to make your own image enhancements, including color, sharpness, a night vision mode or even blue light reduction. The latter is designed to help relieve eye strain in the evening.
The “Game +” category takes you to the integrated gaming functions, where, curiously, HDR is also included. HDR can be completely deactivated, but there is also an auto mode and an HDR mode for movies or gaming in particular on board. You should also activate Adaptive Sync in the submenu, as this is deactivated ex works. Otherwise, you won’t benefit from AMD Freesync, which can cause the image to tear under certain circumstances. All the usual features such as the display of the timer and the total playing time, an adjustable crosshair and an FPS counter can be activated here.
Quality of the display
- Resolution of 2560×1440 in 16:9 format (108 ppi)
- Refresh rate up to 180 Hz and 1 ms response time
- Features: HDR, VRR, ALLM, PIP/PBP
The TITAN ARMY P27GR has a resolution of 2560×1440 pixels in the classic 16:9 format. This is still a good value for gaming, even if more and more monitors are now moving towards widescreen and thus to the 21:9 format. However, those who prefer this usually have to dig a little deeper into their pockets. The pixel density is 108 ppi, based on the WQHD resolution and taking into account the display size of 27″. Apart from this, the refresh rate of the P27GR is up to 180 Hz via the DisplayPort connection. Throttling to intermediate levels such as 120 Hz, 144 Hz or 165 Hz is also possible. To be able to use the HDR functionality, it must first be activated manually in the OSD. Otherwise, the monitor is initially recognized by Windows as “Not supported”.
As a further extra, the TITAN ARMY P27GR is equipped with sPX mode and supports VRR and ALLM. This offers higher picture quality, especially when using consoles. With the PIP/PBP function, the monitor can be split into two screens to display two separate video signals simultaneously. The response time of 1 ms with GTG is very good!
Practical test: Picture quality
- Good productivity with more space for windows thanks to WQHD resolution
- Strong gaming features, including Adaptive Sync without screen tearing
- Brilliant colors thanks to Fast IPS panel, hardly any backlight bleeding
In our practical test, we used the monitor for several hours of gaming, but also actively tested it for productivity. The monitor proved to be a good companion for the home office with its WQHD resolution, even if this is of course not the direct area of application for the TITAN ARMY P27GR. Nevertheless, it is much more pleasant to have more space for a window than with conventional Full HD monitors.
Of course, the monitor can play to its strengths when gaming and delivers impressive images here. Thanks to Adaptive Sync, we didn’t notice any tearing. In terms of gaming features, the post-processing of dark scenes is really helpful. The monitor analyzes dark areas in real time and brightens them up without the picture quality suffering noticeably. This was a clear advantage in the Dying Light 2 test! The integrated image sharpening and color enhancement are also nice, even if they should not be used to their full extent. Of the 10 gradations, however, a setting of 3 is fine and makes for a somewhat crisper image.
The color of the TITAN ARMY P27GR display is preadjusted ex works. Thanks to the use of a Fast IPS panel, the color brilliance is more pleasant than with an HVA panel. Even better, but also considerably more expensive, are displays with OLED panels, which ensure true black, among other things. The problem of backlight bleeding only occurs very slightly at the edges and only becomes apparent when you explicitly pay attention to it. This should not play a role in everyday use.
TITAN ARMY P27GR test: Conclusion
For a price of currently under €200 (test date: 07.09.2024), the TITAN ARMY P27GR offers a solid price-performance ratio with many features that should be of particular interest to gamers. The immersive effect when gaming is of course lost due to the flat display, but the P27GR still offers a beautiful IPS panel with good image illumination. If you are looking for a WQHD monitor and also value a high refresh rate, you will definitely find it here with its 180 Hz. If you look at the number of connections, you are also well equipped for today’s applications.
Many functions are hidden in the OSD menu, which is why you should actually spend a few minutes trying them out during the initial setup. Otherwise, the gaming monitor cannot develop its full potential. However, as the controls are a little spongy, it can be quite tiring in the meantime. As a rule, however, the configuration is not changed over a longer period of time, which is why this circumstance should be negligible.
All in all, the TITAN ARMY P27GR offers a lot of performance for the money, coupled with convincing picture quality. As a rule, the format of the gaming monitor and the thickness of the bezel are also decisive for the purchase. Anyone who still prefers the 16:9 aspect ratio and has no problem with almost 9 mm bezels should definitely get their money’s worth here.
TITAN ARMY P27GR
Processing
Picture quality
Features
Price-performance ratio
88/100
Solid 27" gaming monitor with 180 Hz and WQHD resolution. There are also numerous image optimization features for gamers.
