New cooling solutions from Cooler Master

Cooler Master not only presented new mice, keyboards and cases at Summer Summit 2021, but also new products from the cooling segment. Thus, new AiO coolers, Mobius fans and air coolers from the manufacturer are coming out.

AiO coolers MasterLiquid ML240P and ML360P Flux

The AiO coolers are both powerful and eye-catching. With their dual-chamber pumps, not only higher flow but also higher pressure is achieved. At the same time, the appearance of the coolers is characterized by the A-RGB LEDs on the SickleFlow fans. The lighting can then be controlled either by the included controller or by Cooler Master MasterPlus+ software. The AiO coolers are equipped with 120 mm fans that reach a maximum of 2,300 rpm. In addition, the socket compatibility turns out well, so that the Intel sockets LGA 2066, 2011-v3, 2011, 1200, 115x and 1700 and the AMD sockets AM4, AM3(+), AM2(+), FM2(+), FM1 and TR4 are supported here.

Air Coolers Hyper H6 ARGB and Hyper H6DT ARGB

When it comes to air coolers, Cooler Master has also unveiled two models, with neither of them forgoing A-RGB lighting. The Hyper H6 ARGB model is equipped with one 120mm ARGB fan, and the Hyper H6DT ARGB has two 120mm ARGB fans on board at once. The basic design of the air coolers is very different. The Hyper H6 ARGB is designed as a single-tower cooler and the Hyper H6DT ARGB as a dual-tower cooler. Six heat pipes were installed in both coolers. The Dimensional Heat Pipe Contact (XDHC) ensures complete CPU coverage here. The compatibility of the air coolers is also very high, they fit on the Intel sockets LGA 2066, 2011-v3, 2011, 1200, 1366 and 115x and on the AMD sockets AM4, AM3(+), AM2(+), FM2(+) and FM1.

Cooler Master Mobius fans

Cooler Master’s Mobius series is also expanding, so the new fans come a Ring Blade Design (RBD), where the rotor blades are connected to each other. Such a design provides more stability in cooling while reducing vibration.

LED TUBE SLEEVE A1

Last but not least, Cooler Master has introduced something for water cooling enthusiasts. The LED TUBE SLEEVE A1 is pulled over the hoses and is then supposed to provide terrific lighting with a total of 30 ARGB LEDs. The sleeve has a length of 33 cm and is available with a diameter of 10 or 12 mm. It is simply controlled via a compatible mainboard with an ARGB connector.

Availability and pricing

When Cooler Master’s new cooling solutions will be out and at what prices has not yet been announced.