Sharkoon has introduced its new ATX case, the REV300. The case has seven PWM fans pre-installed, so the components can be cooled directly.
Optimal cooling from the start
The new Sharkoon REV300 has already received seven PWM fans from the manufacturer, three of which are 140mm fans on the front, there are three more 120mm fans on the back and one 120mm fan on the top of the case. Thus, it is already equipped with the maximum number of RGB fans by default and brings optimal cooling performance right from the start. To support the fans, the front of the case is made of a mesh grille and allows for even better airflow.
If the user prefers water cooling systems, these can also be installed in the REV300. A maximum of one 360 mm radiator can be installed on the back and a maximum of one 420 mm radiator on the front. However, the height must not exceed 3.2 cm, otherwise it will be tight. The length is limited to 46.5 cm and the width to 14.1 cm for the radiators.
As with the other cases of the REV series, the installation of components is done via the right side. The mainboard is rotated by 90 degrees, so that the individual components are presented via the right side through the glass side panel. Thereby, the side panel is fixed by a magnetic side panel and hooked on the back via hinges. Thus, the case can be easily opened and also closed again. In addition, there is a USB-C port and four USB ports on the I/O panel.
Thanks to the size and design of the Sharkoon REV300, the individual components inside are perfectly showcased. The corners of the case slightly overhang and thus enclose the mesh front panel. This way, the three RGB fans are wonderfully presented. The simple elegance of the REV300 is further emphasized by the impressive RGB lighting of the fans and the glass side panel provides a special presentation of the individual components inside. Thanks to the bracket specially designed for the REV300, Angled Graphics Card Kit, the graphics cards can be presented especially well.
Place for high-quality components
With dimensions of 50.1 x 23.8 x 55.0 cm (L x W x H), the Sharkoon REV300 is especially suitable for high-quality components. Thus, graphics cards up to a length of 34.5 cm and CPU coolers up to 17.7 cm can easily find space inside. Without causing problems, power supplies up to a length of 27 cm can also find space in the case.