Cuboid Light Strip behind Glass: Sharkoon TG6 RGB

The Sharkoon Midi Tower scores with glass panels on the sides and front. The eye-catcher are the fans illuminated with RGB light strips on three levels. The Sharkoon TG6 RGB is available from ca. 85 Euro.

A control board for RGB components connects the LEDs. This also offers four additional connections for lighting elements. At the push of a button you can select between 20 preset effects, but also a free configuration is possible via mainboards with RGB headers (5V-D-Coded-G or 5V-D-G).

Two USB 2.0 and two USB 3.0 ports each as well as an HD audio connection on the upper side round off the I/O panel.

Click here to display content from

Inside, the power supply unit and HDD cage are installed under a cover, which can be moved to make room for radiators up to 5.2 cm thick in the front. Two 2.5-inch drives and a 3.5-inch HDD can be installed in the HDD cage. Four 2.5-inch hard drives can also be mounted in individual brackets on the back of the mainboard tray and the top of the center tunnel.

Coolers up to 165 mm can be used in the TG6 RGB. Four 120 mm fans (decoupled via rubberized pads) are included. Their brackets are covered with a screen. It is possible to retrofit two 140 mm models or alternatively even three 120 mm models.

Dust filters are also provided: they are located at the front of the housing, on the lid and under the power supply unit at the bottom.

The housing is made of glass, plastic and steel. The size is 465 x 215 x 425 mm. This results in a total net weight of just over 8 kilograms.

Simon Lüthje

I am co-founder of this blog and am very interested in everything that has to do with technology, but I also like to play games. I was born in Hamburg, but now I live in Bad Segeberg.

Related Articles

Leave a Reply

Back to top button