Lighting options in the Sharkoon TG5 Pro RGB
As already mentioned, the Sharkoon TG5 Pro RGB has four case fans with digitally addressable LEDs. These LEDs are controlled via a control board on the back of the mainboard tray. The circuit board has a total of eight 3-pin RGB headers and can be controlled in two different ways. The first possibility is the connection via a 3-pin RGB header (5V, DATA, GND). Supported are the mainboards of all manufacturers with a corresponding connector. Variant two is the control via the reset button of the housing. For this, the board only needs to be supplied with power via a SATA connector. The reset button was already connected to the RGB controller in our case. As usual, the controller has various integrated modes and color profiles.
Finally, a few impressions of the lighting should not be missing in this case.